Art.	264		Specifications
	TIG	MMA
	230V 50/60 Hz + 15% / -20%		Single phase input
	16 A		Fuse rating (slow blow)
	4    KVA 35% 2,7 KVA 60% 2,2 KVA 100%	4,6 KVA 30% 3,5 KVA 60% 2,8 KVA 100%	Input power
	5A ÷ 180A	10A ÷ 140A	Current adjustment range
	180A 35% 135A 60% 110A 100%	140A 30% 115A 60% 95A 100%	Duty Cycle (10 min.40°C) According to IEC 60974.1
	IP 23 S		Protection class
	10,3 Kg		Weight
	171x420x340H		Dimensions mm

WIN TIG DC 180 M (art. 551) is a single-phase inverter power source (180A 35%), suitable for TIG and MMA/-SMAW welding, with the exception of AWS6010 cellulosic electrodes; mainly designed on purpose for maintenance and repair works, as well as small production batches.

The welding machine is characterized by a black-colored casing (Special black edition).

The welding current can be adjusted from 5 to 180A and two potentiometers allow respectively the slope down and the post-gas function adjustment.

In TIG mode, the arc is started either on high frequency or by contact through the Cebora lift-system.
It features a 2 stage/4 stage selection key.

It is set up for remote control via foot control (art. 193), standard remote control (art.187+1192) or updown control on the torch (art. 1262).

The protection gases to be used are argon, argon/helium, argon/hydrogen.

It is also possible to memorize up to 9 welding programs (JOB).

Compliance with EN 61000-3-12 ensures a significant reduction in energy consumption and a wide tolerance on supply voltage (+15%/ -20%).

The power source can be powered by adequately powered motor-generators (Min. 8 KVA).

Dokumentacija:

https://www.cebora.it/art_551_presentazione_prod_uk.html

CIJENA: 7.550,00 Kn + PDV