INVERTER MULTIVOLTAGE MMA AND PULSE DC TIG WELDING POWER SOURCE. HF IGNITION.
| Art. | 553 | Specifications | ||||
|---|---|---|---|---|---|---|
|
TIG |
MMA |
|||||
 |
230V |
115V |
230V |
115V |
Single phase input |
|
 |
16 A |
25 A |
16 A |
25 A |
Fuse rating (slow blow) |
|
 |
5,3 KVA 30% |
3,8 KVA 40% |
4,5 KVA 35% |
3,6 KVA 35% |
Input power |
|
 |
5A ÷ 220A |
5A ÷ 160A |
10A ÷ 140A |
10A ÷ 110A |
Current adjustment range |
|
 |
220A 30% 140A 100% |
160A 40% 110A 100% |
140A 35% 115A 100% |
110A 35% 75A 100% |
Duty Cycle, (10 min.40°C) |
|
 |
IP 23 S |
Protection class |
||||
 |
16,0 Kg |
Weight |
||||
 |
207x500x411H |
Dimensions mm |
||||
WIN TIG DC 220 M is a single-phase inverter power source also suitable for MMA/-SMAW use, with the exception of AWS6010 cellulosic electrodes; designed on purpose for maintenance work and small production batches.
The new LCD colour display makes use easy and intuitive.
The welding machine shows, in addition to the most known welding processes, several news, such as:
- TIG APC (Active Power Control) welding process that allows to obtain colder welding beads
- High quality arc ignition “EVO ST” in order to optimize the edges junction.
- Spot and intermittence function
- Pulsed arc on low, medium, high and very high frequency for interventions on small thickness where the transferred heat must be minimal
In TIG mode, the arc is started either on high frequency or by contact through the Cebora lift-system.
The power source is set up for remote control using the foot control (art. 193), remote control (art.187+1192) or Up-Down control on the torch (art. 1262).
The protection gases to be used are argon, argon/helium, argon/hydrogen.
It is also possible to memorize up to 9 welding programs (JOB).
The compliance with EN 61000-3-12 ensures a significant reduction in energy consumption and a wide supply voltage tolerance (+ 15% / -20%).
The power source can be powered by motor-generators of adequate power (Min. 10 KVA)
Dokumentacija: